Solvents & Chemicals

Iso Propanol is a clear flammable liquid & completely miscible in water.  It is been widely used in the manufacture of Printed Circuit Boards,  Cleaning of PCB to remove flux residue.  Also used as Glass Cleaners and as propellant in Aerosols. It has other innumerable applications for general Industrial cleaning purposes.

Specification

• MOL.WT - 60.10g/mol

• Assay - 99 %
• Appearanse - Clear To Pale Yellow
• Density - 0.78
• Flamibility - Highly Flammable
• Water - Less Than 1 %

A clear, heavy liquid with excellent solvency, Trichloroethylene has no flash point as determined by standard test methods. Its high stability in the presence of common chemical stabilizers and low boiling point permit vapor degreasing with low heat input. Easily recycled, the solvent combines outstanding cleaning power with greater economy.

Since this material is not eco-friendly we will be discontinuing this material and coming out with Eco-friendly cleaner which can be substituted for Tri Chloro Ethylene..

Specification

• Mol.Wt. - 131.39 g/mol

• Assay - 99 .0%                         

• Appearance - Clear Liquid

• Density - 1.45

• Flammability - No, Corrosive

• Water -Less Than 0.5 %

Acetone removes organic impurities from substrates and is well suited for greasy/oily contaminations. Its high evaporation rate, however, requires a subsequent cleaning step in e. g. isopropyl alcohol in order to avoid striations on the substrate. Acetone is not well-suited as lift-off medium due to the high fire danger when heated and the trend of particles to be lifted to reabsorb onto the substrate

 

Specification

• Mol.Wt. - 58.08g/mol

• Assay - 99.0 %

• Appearance - Clear Colourless Liquid

• Density - 0.79

• Flammability - Highly Flammable

• Water - Less Than 0.5%

Xylene is a solvent with a rather high boiling point of around 140°C. It is sometimes used in the micro electronic industries

Specification

• Mol.Wt. - 106.17g/mol

• Assay - 99.0 %

• Appearance - Clear  Liquid

• Density - 0.86

• Flammability - Flammable, Irritant

• Water - Less Than 1 %

Toluene is a clear, water-insoluble liquid with the typical smell of paint thinner. Toluene is a common solvent able to dissolve paints, paint thinners &  silicone sealants,

Specification

• Mol.Wt. - 92.14g/mol

• Assay - 99.0 %

• Appearance - Clear Liquid

• Density - 0.87

• Flammability - Highly Flammable; Harmful

• Water Less Than 0.5 %

N.C. THINNER is a mixture of esters, glycol, alcohol,  aromatic solvents and ketones suitable diluents to  all nitro products.
N.C. THINNER contains highly flammable solvents. Harmful if inhaled and if absorbed through skin can cause irritation. Always use protective gloves and eye goggles when handling this product. It is highly recommended to provide proper ventilation on working area.

Specifications

• Appearance Color – Transparent Liquid

• Specific Gravity – 0.85 + / -.02 KG/LIT

• Initial Boiling Point - 0.2

• Copper Corrosion - NONE

• Non – Aromatics - 50 – 60%

MEK (Methyl Ethyl Ketone) with its low boiling point can be used as Chemicals additional thinner for spray coating resists, which require a fast resist film drying on the surface 

Specification

• Mol.Wt. - 72.11g/mol

• Assay - 99.0 %

• Appearance - Clear Liquid

• Density - 0.80

• Flammability - Highly Flammable, Irritant

• Water - Less Than 1.0 %

MIBK, which occurs naturally in food, is a permitted flavouring agent and is used in food-contact materials.  It is also used as an extract on solvent in the manufacture of methyl amyl alcohol and as a denaturant for ethyl alcohol. Because of the irritant effects of MIBK, contact with the skin and eyes should be avoided.  Ingestion of MIBK should not occur with good manufacturing practices. Employees who come into contact with MIBK may not be at  risk, provided that exposure levels in the workplace are kept as low as possible and within the prescribed control limits which are internationally accepted .

Specification

• Mol.Wt. - 100.16g/mol

• Assay - 99.0 %

• Appearance - Clear Liquid

• Density - 0.80

• Flammability - Highly FlammablE

• Water - Less Than 0.5 %

Ethyl Acetate is primarily used as a Solvent  and dilutent & it is low cost, low toxicity, and with bearable odor. It is used to clean circuit boards and also for nail varnish removers. It is also used in paints as an activator or hardener

Specification

• Mol.Wt. - 88.10g/mol

• Assay - 99.0 %

• Appearance - Clear LiquiD

• Density - 0.90

• Flammability - Highly FlammablE

• Water - Less ThaN 0.5 %

Coffee beans and tea leaves are decaffeinated using this solvent